+44 ( 0 ) 1254 775 firstname.lastname@example.org
Please click here to view our Useful Information. These notes are intended as a guide to the processor, particularly the vacuum former, as good practice for the proper storage, forming and handling of the material and similar products. If you have specific questions that are not covered here or in the general notes, please do not hesitate to contact us.
Patterned foils are Acrylic based and are 610mm wide (a few are 915mm).
Stock Substrates – Black ABS 1.5mm, 2.0mm, 2.5mm, 3.0mm & 4.5mm Sheet sizes
305 x 305mm
610 x 610mm
915 x 915mm
1,220 x 1,220mm
Also in 3mm only – 3,040 x 1,520mm
NOTE; Stock substrates can be cut down to create alternative sizes eg 610 x 610mm can be cut into two pieces 610 x 305mm etc.
Other custom sizes and materials are also usually available, but not considered ‘stock’. If you require a size not shown, please ask.
Stock foils laminated to stock substrates 5-7 days ex-works (US)
Stock foils laminated to custom substrates (see below) 3-4 weeks ex-works (US)
Air freight – Allow 5 working days
Sea freight – Allow 2-5 weeks
These are either alternative size sheets that cannot be cut from those above, or alternative materials, for example TPOs, Polyester, coloured or natural ABS, acrylics etc.
These are usually subject to MOQs. For more information, please